Quick answer: Hemp clothing in Faridabad is made by a bench of private-label garment manufacturers that can run hemp alongside organic cotton and linen — The NoName Company (Flexi-MOQ, small to midsize brands), Saivana Garments (5,000 garments/day), ITMS Sourcing (500,000 pieces/year, in-house fabric-to-garment), Shivalik Design (development, sampling and manufacturing under one roof) and Hemp Foundation (the city's hemp-first supplier). The advantage Faridabad has over Delhi or a national supplier is that the fabric mill and the garment factory sit within a few kilometres of each other. Send your style, quantity and delivery date for a specific figure.
Most pages about hemp clothing in Faridabad list a few manufacturers and quote an MOQ. That leaves out the thing that actually decides whether your order runs smoothly.
Faridabad is a garment city with a fabric-processing base underneath it, not a hemp city with a few factories. That combination is unusual. Around 50 apparel export units and 30 fabric processing units employ more than 60,000 people across the cluster, with apparel export potential in the region of ₹3,000 crore. The garment units are export-led and used to being audited by international buying offices. The process houses that supply them sit on the same estates.
The consequence for a hemp buyer is specific. When the cloth and the garment are made in the same city, the sampling loop collapses. You can approve a fabric and a fit sample in the same week instead of waiting for cloth to travel between clusters. The chain of custody stays short, which matters when a transaction certificate has to cover every processing step. And if the first sample needs a fabric change, the alternative swatch is a morning's drive away rather than a courier away.
The sections below cover that single-city advantage, the garment cluster and what it makes, the named units and what each is set up to do, the MOQ reality from Flexi-MOQ to 1,000-unit bulk runs, sampling and fit approval, who buys, styles and blends, quality checks, compliance and export, and how to order from Sector 35.
Faridabad is the one place in NCR where the cloth comes off a process house in DLF Industrial Area and the garment is cut in a factory in Sector 28 or Sector 68 IMT — within a few kilometres, not a few hundred.
That sounds like a logistical convenience. It is actually the thing that decides how much a first order costs you in time and rework.
What it changes at sampling. In a normal hemp supply chain, the fabric is woven and dyed in one city, the garment is cut in another, and the sample travels between them. If the fit sample reveals that the cloth is too stiff for the silhouette, you lose a courier cycle and a week. In Faridabad, the alternative construction is on another estate the same morning. A buyer can test two blends against the same pattern in a single visit.
What it changes in the chain of custody. A certified hemp garment passes through the fabric processor, the garment unit, and any embroidery or printing step. Each needs its own certified link. When those steps are in the same city, the documents can be assembled and checked together rather than chased across states — and a transaction certificate that has to cover every step is easier to obtain when the steps are a short drive apart.
What it changes on delivery. Fabric arriving late from another cluster stalls a cutting line. In Faridabad the fabric and the garment capacity are in the same place, so a delay in one is visible to the other in hours rather than weeks. That does not make delays disappear, but it makes them recoverable.
The honest limit. Faridabad is not the deepest knit cluster in India — Tiruppur is — and it does not grow hemp. What it has is breadth: knit and woven garmenting, fabric processing, printing, embroidery and finishing, all inside one industrial geography. For a hemp apparel programme that needs fabric and garment coordinated rather than each sourced at the national best price, that breadth is worth more than a marginally lower fabric rate from 2,000 km away.
Over 50 apparel export units and 30 fabric processing units, more than 60,000 people employed, and around ₹3,000 crore of apparel export potential — with 4,000-plus textile units across Gurugram and Faridabad together.
Those numbers come from the AEPC-ATDC cluster assessment, made when the SMART Bhawan campus opened amid the Faridabad apparel units. They are old figures in the sense that the campus opening was some years ago, but the structure they describe has held: an export-led garment cluster with processing underneath it.
| Apparel export units | Over 50, with ₹3,000 crore of apparel export potential across the cluster |
|---|---|
| Fabric processing units | Around 30, with roughly 50–55 running process houses in the city, most serving the export market |
| Employment | Over 60,000 people in the cluster |
| Wider textile base | Over 4,000 textile units across Gurugram and Faridabad together, per a 2026 Tribune report on the US tariff rollback |
| Cluster specialism | Denim, kidswear and woven garment units, distinct from Gurugram's corporate wear and high-end garment focus |
| Anchor institutions | AEPC-ATDC SMART Bhawan, with India's first Knitwear Specialty Training Centre and first ATDC Textile Testing Lab in the NCR |
| Largest employer | Shahi Exports, India's largest apparel manufacturer, headquartered at Industrial Plot No. 1, Sector 28, Faridabad |
Two things follow for a hemp buyer. First, the units are used to international buyers — the cluster's buying offices nominate the process houses they consider compliant, which raises the compliance floor for everyone using it. Second, the garment capability is broad rather than narrow — men's, women's and kidswear across woven and knit, which means a hemp range does not have to be confined to one product category.
One hemp-first supplier, and a bench of private-label garment manufacturers with the certifications, capacity and flexibility to run hemp well. The table is organised by what each unit is built for, not by size.
These units are named from published records for context, not as a recommendation. A buyer should verify any certificate and capability independently before ordering.
| Unit and address | Capability | What it means for a hemp order |
|---|---|---|
| Hemp Foundation Plot 141, Sector 68 IMT, 121004 | Dedicated hemp manufacturer and distributor, founded 2019. Fabrics, clothing, bags and towels. B2B focus serving the fashion and apparel industry. | The city's hemp-first option. The right starting point for a hemp-specific range or a construction a general factory would not recognise. Smaller operation, so suited to specialist and premium work rather than very high volume. |
| The NoName Company Sector 49, Kalindi Hills, 121001 | Private-label exporter founded 2018 by Kalpana, working with organic cotton, linen, hemp, bamboo and Tencel. GOTS, ISO, BCI, GRS, Sedex. Worldwide export markets. Founder background includes Walmart, Target and M&S programmes. | The strongest Flexi-MOQ option in the city, built for small to midsize brands. A dedicated network of small and large factories lets it keep prices low and delivery fast even for small batches. Hemp sits inside an existing multi-fibre range rather than being a first attempt. |
| Saivana Garments / Saivana Exports Plot 141, DLF Industrial Area Phase-1, 121003 | Apparel manufacturer established 1994, 5,000 garments a day capacity, around 123 employees as of 2026. The group's seventh Faridabad factory added in 2022, carbon-neutral building with solar, tripling sampling capacity to 180 machines cut-to-pack. GOTS, SEDEX, WRAP. | The volume and compliance end. The 180-machine cut-to-pack sampling capacity is the relevant detail for a buyer who needs multiple fit rounds quickly. The WRAP certification matters where the buyer's own audit covers labour standards. |
| ITMS Sourcing Sector 34 and Sector 68 IMT, 121004 | Established 2014, 500,000-piece annual capacity, 15-plus years of experience. In-house process from fabric to finished garment. Monthly capacity: 40,000 knitted garments, 15,000 woven garments, 30,000 accessories. T-shirts, shirts, tops, hoodies, pants, dresses, jackets, scarves, jumpsuits, bags. | The in-house fabric-to-garment process is the relevant detail — it keeps the chain of custody short on a certified order. Best suited to a buyer who wants one partner for fabric selection, garment production and accessories rather than coordinating three. |
| Shivalik Design Faridabad factory | Development, fabric sourcing, sampling and manufacturing under one roof. In-house laboratory for fabric and garment tests. GRS certified, SMETA audited. Client roster includes Matalan, George and MrBeast. | The development-led option. Best for a buyer bringing a sketch, a reference garment or a tech pack and needing pattern work, fabric alternatives and prototype samples before bulk — which is where most first hemp ranges actually start. |
| Wings2Fashion Faridabad | Custom, private-label and bulk garments across men's garments, women's garments, kidswear, sportswear and private-label clothing. Dedicated GCC market pages for UAE, Saudi Arabia and Oman. | The option for a Middle East-facing programme. Sportswear capability is relevant if the hemp construction is a jersey rather than a woven. |
| Sawhney Global Creations Building 16, DLF Industrial Area Phase-II, 121001 | Manufacturing and supply of readymade garments, listed among flax, linen and hemp manufacturers. Exports to France, Spain and Australia, with ladies' woven tops in cotton among the documented shipments. | An established export unit with hemp in its fibre listing. Useful for a European-facing woven programme where the buyer wants a factory already shipping to EU markets. |
| Vamani Overseas Plot 6F, Additional Industrial Area, NIT, 121001 | Listed among flax, linen and hemp manufacturers, with NIT Faridabad addresses including a Unit-2 at the same plot. | A NIT-side option rather than a DLF or Sector 68 one. Relevant where the buyer's programme is in the older industrial township and proximity to that side of the city matters. |
| Shahi Exports Industrial Plot No. 1, Sector 28, 121008 | India's largest apparel manufacturer and exporter, founded 1974, headquartered in Faridabad. Vertically integrated with a textile plant at Shimoga. Men's, ladies', kidswear and home products. | The scale anchor of the cluster. Relevant where a hemp programme reaches a volume and compliance level that needs a listed-scale counterparty, though a first hemp range is unlikely to start here. |
One honest observation. The hemp-specific knowledge sits in one unit, and the garment flexibility and scale sit in the general manufacturers. That is why we route by order type: a small first hemp range goes to The NoName Company's Flexi-MOQ model, a development-heavy brief goes to Shivalik Design, a volume programme with a fabric-to-garment requirement goes to ITMS, and a hemp-specific construction goes to Hemp Foundation. Quoting all of them the same way would cost you either money or time.
Faridabad has a wider MOQ range than most Indian garment cities, because it has both a Flexi-MOQ private-label exporter built for small brands and volume units running thousands of garments a day.
That range is genuinely useful, and it is also where most first-time buyers misread the market. The same city can supply a 100-piece test run and a 5,000-piece programme, but not from the same unit and not at the same unit price.
| Route | Typical quantity | What you get and what you give up |
|---|---|---|
| Flexi-MOQ private label (e.g. The NoName Company) | Small-batch, built for small to midsize brands | A dedicated network of small and large factories lets the unit keep prices low and delivery fast even for small batches. The right entry point for a first hemp range. You accept that the unit cost is higher than at bulk and that some constructions may not be available at the smallest quantity. |
| Development-led sampling plus small production (e.g. Shivalik Design) | Sample first, then a small production run | Pattern work, fabric alternatives and prototype samples before bulk. Best where the design is not yet fixed. You pay for development separately, which is honest but means the first unit cost includes work that later styles reuse. |
| In-house fabric-to-garment (e.g. ITMS Sourcing) | Set by the fabric programme, often several hundred pieces per style | One partner for fabric, garment and accessories, with the chain of custody kept short. Best where the buyer wants fewer counterparties. You give up some ability to shop the fabric separately. |
| Bulk private label (volume units) | Around 1,000 units per style, per colour | Full control of construction, blend, colour and fit, with fabric dyed for you. Highest setup cost, lowest unit cost at scale. This is the tier an export programme eventually lands in, not the one a first hemp range starts in. |
Two honest observations. First, a very small order carries a higher unit cost, not a lower one, because pattern-making, grading, sampling and cutting setup are largely fixed. A unit advertising a low MOQ at a bulk unit price is either using stock fabric, pooling your run, or has not costed the setup. Second, the Faridabad advantage is strongest at the sampling end. A buyer testing a first hemp style can get a fabric swatch and a fit sample in the same week, which is worth more on a first order than a marginally lower bulk rate.
The sensible sequence for a new hemp line is the same here as anywhere: a stock construction and a simple silhouette first, sold for one season, then custom development once the style has moved. Faridabad makes that sequence cheaper because the sampling loop is short.
Sampling typically takes two to three weeks and production four to six weeks after approval, but in Faridabad the front end can compress because the fabric mill and the garment factory are in the same city.
The stage that most often derails a first hemp garment order is not production — it is the discovery, at fit approval, that the cloth does not suit the silhouette. A fabric that drapes well in a photograph can be too stiff for a dress and too soft for a structured jacket. Finding that out on a sample costs far less than finding it out on bulk, and finding it out in a week rather than three costs less still.
What a Faridabad sampling round looks like. A brief — a sketch, a reference garment, a mood board or a tech pack — is turned into a written specification with construction notes and trim details. Fabric options are proposed with composition, construction and width against each one. The first sample is cut and sewn in-house, then fit and construction are adjusted with you before bulk cutting. Shivalik Design describes exactly this sequence, including an in-house laboratory for fabric and garment tests, and Saivana's 180-machine cut-to-pack sampling capacity is built for multiple fit rounds rather than one.
What to settle at sampling. Four things. The blend — a 26% hemp / 74% lyocell behaves very differently from a 55/45 hemp-cotton or a hemp-linen, and the silhouette depends on it. The needle and stitch length — hemp blends generally want a fine ballpoint or light sharp needle and a shorter stitch than a comparable cotton. The shrinkage — measured on a wash test, not assumed, because it sets the size grading. And the seam performance at the stress points, because a loose hemp weave can slip at the seam.
One practical note. In Faridabad a buyer can approve a fabric swatch at the Sector 35 office and a garment sample at the factory the same morning. That is the single-city advantage in its most concrete form, and it is worth using rather than conducting the whole thing over courier and email.
Four kinds of buyer place hemp garment orders here — a startup testing a first style, a domestic D2C brand, an export buyer or buying house, and a distributor buying private-label stock — and each belongs to a different unit and a different MOQ tier.
The thread running through all four is that nobody should place a season's production on the first order. Sample, fit-approve, run small, watch how the garment behaves on a real customer, then scale — and let the quantity decide which Faridabad unit you use rather than letting the unit decide your quantity.
The city's garment base covers men's, women's and kidswear across woven and knit — t-shirts, shirts, tops, hoodies, pants, dresses, jackets, scarves, jumpsuits and bags — which means a hemp range does not have to be confined to one category.
The blend decides the silhouette far more than the sketch does, and the local units' multi-fibre experience is what makes a hemp blend tractable rather than experimental.
| Hemp–lyocell | Soft hand, good drape, fine surface. Suits shirts, dresses, relaxed trousers and soft jackets. The most forgiving blend for a first range because it reads as a fine fabric rather than a utility cloth, and several Faridabad units already work with Tencel in their existing composition range. |
|---|---|
| Hemp–cotton | More body and a drier hand. Suits kurtas, workwear-inspired shirts, trousers and heavier t-shirts in jersey. Holds a crease better; softens with washing rather than arriving soft. The year-round workhorse, and the blend most Faridabad knit units can run without changing their setup. |
| Hemp–linen | Texture-forward and breathable. Suits summer shirts, dresses and relaxed tailoring — the closest in customer perception to linen, which is both an advantage and a source of confusion at the counter. The units already working in linen (Sawhney, Vamani, The NoName Company) have the relevant experience. |
| Hemp jersey / knit | Used for t-shirts, yoga wear and loungewear. Stretch and recovery matter more here than in wovens. ITMS's 40,000 knitted garments a month and Wings2Fashion's sportswear capability are the relevant local capacities. |
| Heavier constructions | Jackets, structured trousers and bags. On a garment, heavier hemp needs seam and needle attention, because a blunt needle or a long stitch shows immediately on a coarse cloth. ITMS lists jackets and bags among its product range. |
Two practical notes from the factory floor. Hemp blends generally want a fine ballpoint or light sharp needle and a shorter stitch length than a comparable cotton, and they press well at medium heat while slightly damp. Neither is difficult, but both need to be settled at the sample stage rather than discovered during bulk — which is exactly what a fit sample and a sew-off are for.
On hemp clothing, five checks decide whether the order is a success: measurement against the spec, seam strength and slippage on the blend, shade consistency across panels and across the run, trim and label accuracy, and the finishing standard.
Fabric inspection and garment inspection are different disciplines, and a unit that only inspects cloth will miss the failures that matter on a finished piece. Shivalik Design's in-house laboratory for fabric and garment tests is the local example of a unit that treats this as part of production rather than an add-on.
Reports carry photographs of every defect and a clear verdict, so the decision to ship, rework or reject rests on documented evidence rather than a supplier's assurance. The inspection page covers the AQL method and defect tiers in more detail.
For hemp clothing, GOTS covers the organic claim and the processing chain, a social audit covers the sewing floor, and the destination market's labelling rules decide what goes on the care label. All three are confirmed before production, not after.
The certification question is slightly different for clothing than for fabric, because a garment passes through more hands. A GOTS-certified sewing facility buying certified fabric is the common structure, and what your downstream buyer will ask for is the transaction certificate referencing your specific order — not the factory's scope certificate on the wall.
The Faridabad certification stack. The NoName Company holds GOTS, ISO, BCI, GRS and Sedex. Shivalik Design holds GRS and is SMETA audited. Saivana Exports' Faridabad unit is GOTS, SEDEX and WRAP certified and operates from a carbon-neutral building. Which of those applies to your order depends on the unit and the lot, so ask which certificate covers your specific order rather than the company in general.
On the regulatory side, manufacturing and selling hemp clothing in Faridabad is legal. Cultivation is the regulated part and is licensed state by state, and because domestic fibre supply is limited, much of the hemp used in Indian garment manufacturing enters as imported processed fibre or yarn, subject to plant quarantine documentation including a phytosanitary certificate. None of that restricts a Faridabad brand or manufacturer from cutting, sewing and exporting hemp apparel — but it does mean the fibre-origin question is worth asking, because the answer determines what you can honestly claim on the label.
On export, Faridabad is an export-led garment cluster and the compliance and logistics chain from here to EU, US and Australian markets already works. Sawhney Global Creations ships to France, Spain and Australia; The NoName Company exports worldwide; Wings2Fashion covers the GCC. Air freight moves through Indira Gandhi International Airport, and sea consignments typically route through the Inland Container Depot at Tughlakabad towards Jawaharlal Nehru Port. EU, UK, US and Australian labelling rules differ, so the destination market needs to be known at enquiry rather than at dispatch.
Six stages — brief, sampling and fit approval, fabric and trim confirmation, bulk production, inspection and dispatch — with the first two deciding whether the rest is straightforward or expensive.
Style or reference garment, target quantity per style and colour, size range, delivery date and destination market. If you have a tech pack, send it; a photograph and a sketch are enough to start a conversation.
A fit sample is made in the proposed blend and construction. You wear it, correct the fit, and approve. This is where a bad blend choice becomes obvious — and in Faridabad the alternative fabric is on another estate the same morning rather than a courier away.
Blend, GSM, width, shade and shrinkage are locked, and trims, labels and care content are confirmed against the destination market's rules. Certification documents applicable to the lot are assembled here, not after production.
Cutting, stitching, finishing and packing. Production commonly runs four to six weeks after sample approval depending on quantity and construction; custom dyeing adds time before cutting begins.
AQL sampling against the approved specification, with defect tiers agreed in advance. Photographs of any defect and a clear pass, rework or reject verdict before the goods leave.
Packing to the distribution plan, with commercial paperwork and certification documents travelling with the goods. Export consignments move through the Inland Container Depot at Tughlakabad towards Jawaharlal Nehru Port, with air freight through Indira Gandhi International Airport.
On timing, the honest arithmetic: sampling typically takes two to three weeks including one round of fit corrections, and production runs four to six weeks after approval. A brand planning a season should work backwards from the delivery date, not forwards from the order date — and should build in a second sampling round, because most first samples need one.
Ask every supplier the same seven questions and compare the answers, not only the unit price. In a garment cluster, the unit-capability question catches more problems than any other.
| Question | What a good answer sounds like |
|---|---|
| “Which unit will make this garment, and where is it?” | A named unit and a Faridabad address — Sector 28, Sector 68 IMT, DLF Phase-1, DLF Phase-II, Sector 49. Not a trading name without a site. |
| “Has the unit run hemp before?” | A direct answer, with a construction it has run. Hemp behaves differently on the needle and the seam from cotton, and a unit learning on your order is a cost you absorb. |
| “What is the MOQ per style and per colour, and which tier is this?” | A specific number, plus an honest explanation of whether lower volumes use stock fabric, pooled production, or simply cost more per unit. |
| “Which certification covers this order, and will the transaction certificate reference it?” | A named standard, a scope that names the product category, and a TC commitment with your buyer name and quantity. |
| “How many rounds of fit sampling are included?” | At least one correction round. A unit that expects the first sample to be approved has not made many garments. |
| “Can we see the fabric mill and the garment factory in the same visit?” | A yes, with the estates named. This is the Faridabad advantage in its most concrete form, and a supplier who cannot arrange it is not actually operating in the cluster. |
| “What is the delivery date, and what would move it?” | A date with the dependencies named — dyeing, yarn availability, trim lead time, sampling rounds — rather than a date offered without qualification. |
We answer all seven against Faridabad hemp garment production at enquiry. On a clothing line, the cost of a wrong first run is not the unit price — it is the season, the capital tied up in stock, and the confidence of the customer who bought the first piece.
Faridabad has one dedicated hemp-first clothing company, Hemp Foundation at Plot 141, Sector 68 IMT, and a bench of private-label garment manufacturers that can run hemp alongside organic cotton and linen. The NoName Company, founded 2018, is a private-label exporter for small to midsize brands working in organic cotton, linen, hemp, bamboo and Tencel, with GOTS, ISO, BCI, GRS and Sedex, and a Flexi-MOQ model built for small-batch production. Saivana Garments at Plot 141 DLF Industrial Area Phase-1 runs 5,000 garments a day. ITMS Sourcing has a 500,000-piece annual capacity with in-house fabric-to-garment processing. Shivalik Design develops, samples and manufactures at its Faridabad factory with GRS and SMETA certification. Compact Buying Services coordinates supply from Sector 35 and matches the order to the unit that fits it.
Because Faridabad is the one place in NCR where the fabric and the garment can be made within a few kilometres of each other. The cloth comes off a process house in DLF Industrial Area Phase-1 or the Sector 31 belt, and the garment is cut in a factory in Sector 28 or Sector 68 IMT. That collapses the sampling loop — you can approve a fabric and a fit sample in the same week rather than waiting for cloth to travel between clusters — and it keeps the chain of custody short, which matters when a transaction certificate has to cover every processing step. Tiruppur is deeper on knit but you are sourcing fabric and garment from two cities; Delhi has garmenting but less processing depth.
It depends which unit you use, and the range is wider here than most buyers expect. The NoName Company runs a Flexi-MOQ model specifically for small-batch fashion production, built for small to midsize brands — that is the lowest entry point in the city. Bulk private-label units commonly work from around 1,000 units per style and per colour, which is roughly where fabric dyeing and cutting become economical. Saivana Garments runs 5,000 garments a day, so its commercial minimum sits at the volume end. A first order should be the smallest quantity that lets you test the garment at real customers, not a season's stock. Tell us the quantity you have in mind and we will say honestly which Faridabad unit fits it.
Yes, though the certification usually sits with the garment unit rather than with a hemp-specific one. The NoName Company holds GOTS, ISO, BCI, GRS and Sedex. Shivalik Design holds GRS and is SMETA audited. Saivana Exports' Faridabad unit is GOTS, SEDEX and WRAP certified. What matters is whether the transaction certificate references your specific order, not whether the factory holds a scope certificate. Ask for both documents, and match the buyer name and quantity on the TC to your order.
Yes, and Faridabad is one of the few places in NCR where that is genuinely practical at factory level rather than through a trading intermediary. The NoName Company's Flexi-MOQ model exists specifically for small-batch production and is aimed at small to midsize brands — it describes a dedicated network of small and large garment factories to keep prices low and delivery fast even for small batches. The honest constraint is that a very small order carries a higher unit cost, because pattern-making, grading, sampling and cutting setup are largely fixed. The sensible route is a stock construction and a simple silhouette first, then custom development once the style has sold.
The Faridabad garment base runs men's, women's and kidswear across woven and knit. ITMS Sourcing lists t-shirts, shirts, tops, hoodies, pants, dresses, jackets, scarves, jumpsuits and bags, with knitted garments at 40,000 pieces a month and woven at 15,000 a month. Wings2Fashion covers men's garments, women's garments, kidswear, sportswear and private-label clothing. The NoName Company works across organic cotton, linen, hemp, bamboo and Tencel, which means a hemp-cotton jersey or a hemp-linen shirt sits inside its existing range rather than being a first attempt. Hemp works best where structure is an asset — shirts, kurtas, dresses, relaxed trousers, soft jackets and loungewear.
Sampling typically takes two to three weeks including fabric sourcing and one round of fit corrections, and production commonly runs four to six weeks after sample approval depending on quantity, construction and finishing. The Faridabad advantage is that the fabric mill and the garment factory are in the same city, so fabric sourcing and sample development can run in parallel rather than sequentially — which can take a week or more out of the front end compared with sourcing cloth from Tiruppur and stitching in Noida. Tell us the date you need the goods and we will say plainly whether it is achievable.
The common stack is GOTS for organic fibre and processing, GRS for recycled content, BCI for Better Cotton, Sedex or SMETA for social audit, and WRAP on some export units. The NoName Company holds GOTS, ISO, BCI, GRS and Sedex. Shivalik Design holds GRS and is SMETA audited, with an in-house laboratory for fabric and garment tests. Saivana Exports' Faridabad unit is GOTS, SEDEX and WRAP certified and operates from a carbon-neutral building. Ask which certificate covers your specific order rather than the company in general — a scope certificate proves the facility, a transaction certificate proves your shipment.
Yes, and it is worth doing. Our office is at No. 65, Lower Ground Floor, Ashoka Enclave Main, Sector 35, Faridabad, open Monday to Saturday, 9:00 AM to 6:00 PM. Sector 28, Sector 68 IMT and DLF Industrial Area are all a short drive from Sector 35, so a buyer can see a fabric swatch at the office and a garment sample at the factory the same morning. If you want to visit a specific unit, tell us in advance and we will arrange it rather than turning up unannounced.
Yes. Faridabad is an export-led garment cluster — AEPC-ATDC puts it at over 50 apparel export units and 30 fabric processing units employing more than 60,000 people, with around ₹3,000 crore of apparel export potential. The NoName Company exports worldwide and its founder's background includes Walmart, Target and M&S programmes. Sawhney Global Creations exports to France, Spain and Australia. Shahi Exports, India's largest apparel manufacturer, is headquartered in Sector 28 Faridabad. Export documentation and destination-market labelling are confirmed before production. Consignments move through the Inland Container Depot at Tughlakabad towards Jawaharlal Nehru Port, with air freight through Indira Gandhi International Airport.
This page is written for a buyer sourcing from Faridabad specifically — it names the garment units, the estates, and the single-city fabric-plus-garment advantage that neither Delhi nor a national supplier can match. The Delhi page covers that city's two-tier supplier landscape, the Gandhi Nagar and Ohkla clusters, and the Manak Vihar low-MOQ suppliers. The garment manufacturing decision — MOQ arithmetic, fit approval, seam performance, production timeline — is the same on both pages; the local sourcing route is different.
Send your style, quantity, size range and delivery date and we will reply with a manufacturing figure and a Faridabad unit that fits the order within 24 hours. You can also call +91-9891563757 or email sales@organicbuyingservices.com.